Sony PEG-NX73V Read This First Operating Instructions - Page 98
IR port, Removing the CF card - clie palm pda
View all Sony PEG-NX73V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Removing the CF card Make sure that your CLIÉ handheld is turned off, and then pull out the CF card. There is no LED indicator to show when the CF card is writing files/data or is connecting to the Internet. b Pull out the CF card Push the CF card slot to close it Notes • Do not remove the CF card while it is connected to the Internet or reading/writing files/data, as the recorded files/data will be lost. In addition, your CLIÉ handheld and CF card may be damaged. Make sure you turn off your CLIÉ handheld before you remove the CF card. • If the CF card is forcibly removed from the CF card slot in the wrong direction or at the wrong angle, your CLIÉ handheld and CF card may be damaged. IR port You can beam data or applications between your CLIÉ handheld and another CLIÉ handheld or Palm OS® PDA. b For details, refer to "Beaming" in the "Handbook." When using the remote control function, direct your CLIÉ handheld towards a target device as indicated by the upper arrow in the illustration. * Move your CLIÉ handheld gradually to find the most sensitive direction. When using the beaming function, direct your CLIÉ handheld towards a target device as indicated by the right arrow in the illustration. Tip You can also use your CLIÉ handheld as a remote control with CLIE Remote Commander. b For details, refer to the "CLIÉ Application Manual" installed on your computer. 98