Sony SHAKE-X10 Operating Instructions - Page 26
Pairing this system with a BLUETOOTH device, To cancel the pairing operation
View all Sony SHAKE-X10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Pairing this system with a BLUETOOTH device Pairing is an operation where BLUETOOTH devices register with each other beforehand. Once a pairing operation is performed, it does not need to be performed again. If your device is an NFC-compatible smartphone, the manual pairing procedure is not necessary. (See "One Touch BLUETOOTH Connection by NFC" (page 28).) 1 Place the BLUETOOTH device within 1 meter (3.3 feet) from the unit. 2 Press BLUETOOTH on the unit to select the BLUETOOTH function. "BLUETOOTH" appears on the display. Hint ••When there is no pairing information on the system (for example, when you use the BLUETOOTH function for the first time after purchase), "PAIRING" flashes on the display and the system enters the pairing mode. Proceed to step 4. ••If the system is connected to a BLUETOOTH device, press BLUETOOTH on the unit to disconnect the BLUETOOTH device. 3 Hold down PAIRING on the unit for 2 seconds or more. "PAIRING" flashes on the display. 26US 4 Perform the pairing procedure on the BLUETOOTH device. For details, refer to the operating instructions of your BLUETOOTH device. 5 Select the system's name (for example, "SHAKE-X30") on the display of the BLUETOOTH device. Perform this step within 5 minutes, otherwise pairing will be canceled. In this case, repeat from step 3. Note If passkey is required on the BLUETOOTH device, enter "0000". "Passkey" may be called "Passcode", "PIN code", "PIN number", or "Password". 6 Establish connection with the BLUETOOTH device. When pairing is completed and the BLUETOOTH connection is established, BLUETOOTH device name appears on the display. Depending on the BLUETOOTH device, connection may start automatically after pairing is completed. You can check the BLUETOOTH device address by pressing DISPLAY repeatedly. Note ••You can pair up to 9 BLUETOOTH devices. If the 10th BLUETOOTH device is paired, the oldest paired device will be deleted. ••If you want to pair with another BLUETOOTH device, repeat steps 1 to 6. To cancel the pairing operation Hold down PAIRING on the unit for 2 seconds or more until "BLUETOOTH" appears on the display.