Sony SLV-M11HF Operating Instructions - Page 10
Recording TV programs continued, INPUT SELECT button. - remote
View all Sony SLV-M11HF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Recording TV programs (continued) Tips • To select a channel, you can use the number buttons on the remote commander. Enter the channel number, then press ENTER. • You can select a video source from the LINE-1 IN or LINE-2 IN jacks using the INPUT SELECT button. • The display appears on the TV screen indicating information about the tape, but the information won't be recorded on the tape. • If you don't want to watch TV while recording, you can turn off the TV. When using a cable box, make sure to leave it on. Notes • The remaining tape length may not be indicated accurately for short tapes such as T-20 or T-30, or tapes recorded in the LP mode. • The display does not appear during still (pause) mode or slow-motion playback. • It may take up to one minute for the VCR to calculate and display the remaining tape length after you press DISPLAY. 10 Basic Operations