Sony SLV-M11HF Operating Instructions - Page 42
Recording a program on the SmartFile tape, To check the information of a recorded program
View all Sony SLV-M11HF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Recording using the SmartFile function (continued) Recording a program on the SmartFile tape When recording a program on the SmartFile tape, no matter what method you use to record the program (normal recording, the VCR Plus+ GOLD system recording, etc.), program data (date, channel, recording start time, etc.) is stored in the memory of the SmartFile label. The SmartFile label can contain up to 12 programs' data. When the number of the stored programs goes over 12, the oldest program data is erased from the SmartFile list. However, a program which lasts less than about 15 minutes in EP mode or about 5 minutes in SP mode cannot be stored in the memory. When you record a program on the SmartFile tape which already contains program data, see "Recording after locating the Blank Time space" on page␣44. Tip • You can protect a recorded program from accidental over-recording or erasure (see page 58). Note • If you press X PAUSE one or more times during recording, thereby creating short lengths of recorded time between such pauses, program data may not be stored in the SmartFile label. To check the information of a recorded program Press SMARTFILE. The SmartFile search list appears. The recording day of the week, start time, channel, date, station ID, recording time, and tape speed appear on the list. The longest space which doesn't have any program data (Blank Time space) appears as "BLANK TIME". Day of the week Recording start time Initial and latest dates of use for this SmartFile tape Channel 8/10/99~8/10/99 BLANK TIME TUE 2 : 3 0 PM CH 8 XYZ p . 1 EP 5 H 3 0 M 8 /10 0 H 3 0 M EP START END Date Tape speed Recording time Station ID Estimated position of the recorded program 42 SmartFile Function