Sony SLV-M11HF Operating Instructions - Page 41
Recording using the SmartFile function
View all Sony SLV-M11HF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Recording using the SmartFile function To use the SmartFile function, attach the SmartFile label to the spine of the cassette tape. If you record a program on a tape with a SmartFile label, program data, such as the date and channel, is automatically stored in the memory of the SmartFile label. Attaching the SmartFile label to the cassette tape To use the SmartFile function, attach the supplied SmartFile label to the cassette tape. Remove any stains or dirt from the surface of the spine of the tape. Then, holding both edges of the SmartFile label so that it doesn't bend, attach it along the guide line to the spine SMARTFILE SENSOR of the cassette tape. This tape is henceforth referred to as a SmartFile tape. Note on the purchase of SmartFile labels • For the customers in the USA To order additional SmartFile labels, see the back page. • For the customers in Canada Additional SmartFile labels can be purchased at Sony of Canada Ltd. Authorized VHS Dealers. Notes • The SmartFile label is equipped with a memory chip. The memory chip may be damaged and cannot be used when you: - twist or fold the SmartFile label. - remove the SmartFile label and re-attach it to a tape. - attach more than one SmartFile label to a tape. - attach some metal, or sticker which has metal, to the SmartFile label. - write too strongly on the SmartFile label using a ballpoint pen or similar sharp instrument. - disassemble or remodel a label. • Do not leave the SmartFile label in a place subject to excessive dust or dirt, direct sunlight, humidity, mildew, strong magnetism, or near heat sources. • If you attach the SmartFile label to a short length tape, such as T-30 or shorter, you cannot use the SmartFile function. continued SmartFile Function 41