Sony SLV-N99 Operating Instructions - Page 21
Hookup 4, Antenna hookup
View all Sony SLV-N99 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
010GET.fm Page 21 Friday, November 30, 2001 1:47 PM Getting Started Hookup 4 Antenna hookup Make the following connections if you're using an antenna (if you don't have cable TV). A Use this hookup if you're using: • VHF/UHF antenna (you get channels 2-13 and channels 14 and higher) • UHF-only antenna (you get channels 14 and higher) • Separate VHF and UHF antennas VCR VHF/UHF IN OUT Rear of TV VHF/UHF A Match the type of connector on your or VHF TV: A, B, or C. B UHF or VHF C UHF B Use this hookup if you're using a VHF-only antenna (you get channels 2-13 only) VCR VHF/UHF IN OUT Rear of TV VHF/UHF A Match the type of connector on your or TV: A, B, or C. VHF B For connector types B and C, no UHF or UHF connection is VHF required. C UHF If you cannot connect your antenna cable to the VCR directly If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external antenna connector (not supplied) so you can connect the cable to the VHF/UHF IN connector. If you have separate cables for VHF and UHF antennas, you should use a U/V band mixer (not supplied). For details, see page 93. continued Hookups 21 filename[010GET.fm] model name1[SLV-N99] [3-071-065-11(1)]