Sony SLV-N99 Operating Instructions - Page 63

Basic Operations 010BAS.fm Page 63 Friday, November 30, 2001 1:52 PM 7 DIAL TIMER Press DIAL TIMER. The channel number or station ID appears in the display window. VIDEO APC EP 8 DIAL TIMER Turn DIAL TIMER to set the channel number. To record from a source connected to the LINE-1 IN or LINE-2 IN jacks, turn DIAL TIMER or press INPUT SELECT to display "L1" or "L2". INPUT SELECT If the CABLE BOX CONTROL setting is ON, you can change the channel number in units of 100 by pressing the CHANNEL +/- buttons. VIDEO APC EP 9 DIAL TIMER Press DIAL TIMER to complete the setting. "OK" appears in the display window for about five seconds. The indicator appears in the display window and the VCR stands by for recording. When using a cable box, leave it on. To return to the previous step To return to the previous step, press the CHANNEL + and - buttons on the VCR at the same time during any of the Dial Timer settings. To stop recording To stop the VCR while recording, press x STOP. To use the VCR after setting the timer To use the VCR before a timer recording begins, just press ?/1. The indicator disappears from the display window and the VCR switches on. Remember to press ?/1 to reset the VCR to the timer recording standby mode after using the VCR. You can also do the following tasks while the VCR is recording: • Reset the counter (page 56). • Display tape information on the TV screen (page 59). • Check the timer settings (page 76). • Watch another TV program (page 60). continued Recording TV programs using the Dial Timer 63 filename[010BAS.fm] model name1[SLV-N99] [3-071-065-11 (1)]