Sony SLV-N99 Operating Instructions - Page 68
To use the VCR after setting the timer
View all Sony SLV-N99 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
010BAS.fm Page 68 Friday, November 30, 2001 1:52 PM To use the VCR after setting the timer To use the VCR before timer recording begins, just press ?/1. The indicator disappears from the display window and the VCR switches on. Remember to press ?/1 to reset the VCR to the timer recording standby mode after using the VCR. You can also do the following tasks while the VCR is recording: • Reset the counter (page 56). • Display tape information on the TV screen (page 59). • Check the timer settings (page 76). • Watch another TV program (page 60). Tips • To check, change or cancel the program setting, see "Checking/changing/canceling timer settings" (page 76). • When you are recording a program in the SP mode and the remaining tape becomes shorter than the recording time, the tape speed is automatically changed to the EP mode. Note that some noise will appear on the picture when the tape speed is changed. If you want to keep the tape speed, set AUTO TAPE SPEED to OFF in the ADVANCED OPTIONS menu (page 88). Notes • If the VCR does not accept the PlusCode number, this means that: - The PlusCode number is incorrect. - ONCE, DAILY, or WEEKLY was selected incorrectly. You cannot select DAILY or WEEKLY for a program that airs more than seven days ahead. • The station ID appears on the TV screen only when you complete Smart Channel Mapping and the VCR receives the program information signal (see page 49). 68 Recording TV programs using the VCR Plus+ GOLD system filename[010BAS.fm] model name1[SLV-N99] [3-071-065-11 (1)]