Sony SLV-N99 Operating Instructions - Page 29

010GET.fm Page 29 Friday, November 30, 2001 1:47 PM Getting Started 3 Press M/m to highlight AUTO, then press AUTO CLOCK SET OK. PLAY FULL AUTO YES CLOCK SET CH TIME ZONE OK DAYLIGHT SAVING RETURN SELECT : SET : OK QUIT : MENU 4 Press M/m to highlight FULL AUTO, then AUTO CLOCK SET press OK. PLAY FULL AUTO YES CLOCK SET CH NO TIME ZONE OK DAYLIGHT SAVING RETURN SELECT : SET : OK QUIT : MENU 5 Press M/m to highlight YES, then press OK. PLAY OK 6 Press MENU to exit the menu. MENU 7 To activate the Auto Clock Set function, turn off the VCR. "ACS" will flash in the display window. The VCR automatically sets the clock by searching for a channel that carries a time signal and sets your time zone and Daylight Saving Time (if applicable). If your clock is set to the wrong time zone or Daylight Saving Time, you can adjust these settings without turning off the Auto Clock Set feature (page 30). Tip • If you want to return to the previous menu, highlight RETURN and press OK. Notes • The clock cannot be set automatically if you don't receive a channel that carries a time signal in your area. If so, set the clock manually (see page 33). • If there are only a few channels in your area that carry time signals, setting the clock automatically may take up to about 30 minutes. If nothing happens even after you wait about 30 minutes, set the clock manually. • If you use Hookup 1 or 5, make sure you leave the cable box on. • If the clock is not set, "ACS" will flash in the display window whenever the VCR is turned off. During this time, the VCR will search for a time signal. continued Setting the clock 29 filename[010GET.fm] model name1[SLV-N99] [3-071-065-11(1)]