Sony SLV-N99 Operating Instructions - Page 93
Attaching the external antenna connector, Attaching a UHF/VHF band mixer
View all Sony SLV-N99 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
010ADDI.fm Page 93 Friday, November 30, 2001 1:58 PM Attaching the external antenna connector When using a 300-ohm twin lead cable for a VHF/UHF antenna, use the EAC-32 antenna connector (not supplied) to connect the antenna to the VCR. 300-ohm twin lead cable EAC-32 antenna connector (not supplied) 1 Loosen the screws on the antenna connector. 2 Wind the twin leads around the screws on the antenna connector. 3 Retighten the screws. Attaching a UHF/VHF band mixer When using both a 75-ohm coaxial cable and a 300-ohm twin lead cable for a VHF/UHF antenna, use the EAC-66 UHF/VHF band separator/mixer (not supplied) to connect the antenna to the VCR. 300-ohm twin lead cable EAC-66 UHF/VHF band separator/ mixer (not supplied) 75-ohm coaxial cable 1 Loosen the screws on the mixer. 2 Wind the twin leads around the screws on the mixer. 3 Retighten the screws. 4 Connect the 75-ohm coaxial cable to the mixer. Additional Information General setup information 93 filename[010ADDI.fm] model name1[SLV-N99] [3-071-065-11 (1)]