Sony UPX-C300 Operating Instructions - Page 58

Operation with Several Printers In a system using several printers, the basic operations are the same as when one printer is used. If the camera is turned on after a printer is turned on, the camera automatically searches for registered printers. The names and Bluetooth addresses of all printers with which connection has been established are displayed in black. Those of any printers with which connection has failed are displayed in gray. Printers to be used can be selected with the PRINTER button. When a connected printer is selected, the print conditions of the selected printer are displayed in white on the LCD. If a printer that is not connected is selected, an alarm will be displayed in yellow. To establish a connection with a currently disconnected printer, first check that the printer is turned on, and that the Bluetooth lamp is lit. In addition, press the PRINTER button on the camera, and make sure that the name of the printer to be connected is displayed in yellow. Then, press the PRINT button. "Reconnecting. . ." is displayed, and the process of reconnection starts. When reconnection has been established, in CAMERA mode, the camera returns to the normal recording mode. In PLAY or Auto Review mode, the Print Preview display is displayed. To start printing, press the PRINT button again. Transmission of image data starts. If printing is not required, press the MENU button to terminate the Print Preview display. Maintaining System Performance To maintain system performance, be sure to read the following. Camera Locations of use and storage Using or storing the camera in any of the following locations may result in a malfunction. Do not use or store the camera in such locations. • Extremely hot or cold locations (operating temperature of 5 °C to 35 °C (41 °F to 95 °F) • Locations subject to prolonged periods of direct sunlight or near heating appliances • Locations with excessive humidity or dust • Locations exposed to rain • Locations exposed to severe vibration • Near sources of strong magnetism • Near sources of strong electromagnetic waves such as TV or radio transmitters Heat dissipation Do not cover the camera (such as with a cloth) Doing so will increase the internal temperature and may result in a malfunction. Transportation When transporting the camera, be sure to pack it in the supplied carton and cushioning or equivalent packaging, and make sure it is not subject to severe mechanical shocks. Taking test pictures Be sure to take test pictures beforehand to ensure that pictures can be taken normally. Lens Be careful not to bump into or press against the lens while shooting. Also, do not touch the lens surface. 58 Maintaining System Performance