Sony UPX-C300 Operating Instructions - Page 65

Error Messages Camera Printer Cause/Solution SET MEDIA SET NEW RIBBON PUSH [EXEC] • The print cartridge is not installed properly. tInstall the print cartridge properly, and press the EXEC button. • The print cartridge has run out. tReplace the print cartridge, and press the EXEC button. SET PAPER PUSH [EXEC] • The paper tray is not installed. tInstall the paper tray, and press the EXEC button. • The print paper has run out. tInsert print paper, and press the EXEC button. CHECK PRINTER MEDIA MISMATCH PUSH [EXEC] • The print paper and print cartridge do not match. tInsert the correct print paper and press the EXEC button. PAPER JAMMING REMOVE PRINTS • There is a print paper jam. tRemove the jammed paper, and try printing again. (See "Removing Jammed Paper" on page 63) REMOVE PRINTS PUSH [EXEC] • Print paper remains in the ejection slot. tRemove the paper tray, remove the print paper, and then press the EXEC button. PRINTER ERROR SERVICE CALL • There is a problem with the printer. tContact your nearest Sony dealer. - • The menu is displayed in the operation display on the printer. tEnd the menu operation, and display the READY screen. - • The printer is not connected correctly. tTurn the camera and printer off and then on again, and then try again. TRANSMISSION - FAILED! • Print data failed to transmit. tTurn the camera and printer off and then on again, and then try the operation again. After performing the actions described above, press the MENU button to clear the error message on the camera. 65 Troubleshooting