Sony VGN-FE770G User Guide - Page 157
VGN-AR200 Series models, To change or add a memory module
UPC - 027242704428
View all Sony VGN-FE770G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
n 157 N Upgrading Your VAIO Computer VGN-AR200 Series models To change or add a memory module 1 Shut down the computer and disconnect all peripheral devices. 2 Unplug the computer and remove the battery pack. 3 Wait until the computer cools down. 4 Unscrew the screw (indicated by the arrow below) on the bottom of the computer and remove the memory module compartment cover. 5 Touch a metal object (such as the connector panel on the back of the computer) to discharge static electricity. 6 Remove the memory module: ❑ Pull the latches in the direction of the arrows (1). The memory module is released. ❑ Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2).
157
n
N
Upgrading Your VAIO Computer
VGN-AR200 Series models
To change or add a memory module
1
Shut down the computer and disconnect all peripheral devices.
2
Unplug the computer and remove the battery pack.
3
Wait until the computer cools down.
4
Unscrew the screw (indicated by the arrow below) on the bottom of the computer and remove the memory module
compartment cover.
5
Touch a metal object (such as the connector panel on the back of the computer) to discharge static electricity.
6
Remove the memory module:
❑
Pull the latches in the direction of the arrows (1).
The memory module is released.
❑
Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2).