Sony VPL-FX30 Operating Instructions - Page 30

Symptom, Remedy, the Remote Commander.

Get Sony VPL-FX30 PDF manuals and user guides View all Sony VPL-FX30 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Symptom No sound. The Remote Commander does not work. The fan is noisy. Remedy Page Check that the connecting cables between the projector and 8 external video or audio equipment are securely connected. Check if the output setting of connected external audio - equipment is set for output the audio signal from the projector. Audio is not output if audio muting is activated. 6 Check if the "Audio Output Vol." is set to minimum. 6 Check that the batteries are installed correctly. - Check that the batteries are not exhausted. - Check if the "ID Mode" of the projector corresponds to that of 6, 20 the Remote Commander. Check the setting for "IR Receiver." 20 The sound from the fan is often greater than normal to cool the lamp in the following cases. • When "Lamp Mode" is set to "High." • The projector is in at high altitude ("High Altitude Mode" is set to "On") • Temperature is very high 19, 22 If the ventilation holes are blocked, the internal temperature of 3 the projector rises and the fan noise becomes larger. 30 Troubleshooting

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
30
Troubleshooting
No sound.
Check that the connecting cables between the projector and
external video or audio equipment are securely connected.
8
Check if the output setting of connected external audio
equipment is set for output the audio signal from the projector.
–
Audio is not output if audio muting is activated.
6
Check if the “Audio Output Vol.” is set to minimum.
6
The Remote
Commander does not
work.
Check that the batteries are installed correctly.
–
Check that the batteries are not exhausted.
–
Check if the “ID Mode” of the projector corresponds to that of
the Remote Commander.
6, 20
Check the setting for “IR Receiver.”
20
The fan is noisy.
The sound from the fan is often greater than normal to cool the
lamp in the following cases.
• When “Lamp Mode” is set to “High.”
• The projector is in at high altitude (“High Altitude Mode” is
set to “On”)
• Temperature is very high
19, 22
If the ventilation holes are blocked, the internal temperature of
the projector rises and the fan noise becomes larger.
3
Symptom
Remedy
Page