Sony VPL-FX30 Operating Instructions - Page 8
Preparation, Connecting the Projector, Connecting a Computer
View all Sony VPL-FX30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
B Preparation Connecting the Projector Notes • Turn off all equipment before making any connections. • Use the proper cables for each connection. • Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself. • For more information, refer also to the instruction manuals of the equipment you are connecting. • Use a no-resistance audio cable. Connecting a Computer Connection with a computer is explained for each input signal. INPUT A For connection when there is some distance between a computer and the projector. RGB output connector Mini D-sub 15-pin - BNC cable (not supplied) Computer Audio output connector Audio cable (Stereo mini plug) (not supplied) INPUT B For connecting a computer with an RGB output connector. RGB output connector Mini D-sub 15-pin cable (not supplied) Computer Audio output connector Audio cable (Stereo mini plug) (not supplied) Note It is recommended that you set the resolution of your computer to 1024 × 768 pixels for the external monitor. 8 Connecting the Projector