Sony VPL-FX30 Operating Instructions - Page 33
Cleaning the Air Filter
View all Sony VPL-FX30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Cleaning the Air Filter When a message appears on the projected image indicating time for a filter cleaning, clean the air filter (pages 27, 28). If the dust cannot be removed from the air filter even after cleaning, replace the air filter with a new one. For details on a new air filter, consult with qualified Sony personnel. Caution If you neglect to clean the air filter, dust may accumulate, clogging it. As a result, the temperature may rise inside the unit, leading to a possible malfunction or fire. 1 Turn off the projector, and disconnect the AC power cord from the AC outlet. 2 Open the rear panel by loosening the three screws on the rear panel. 4 Clean the air filter with a vacuum cleaner. Remove the cover as illustrated below then clean the four air filters. The two air filters on the bottom of the air filter unit cannot be removed from the air filter unit. Screws 3 Pull out the air filter unit. Cover Air filter Others Air filter unit 5 Return the air filter to the air filter unit then return it to the projector. 6 Close the rear panel and tighten the three screws. Note Be sure to attach the air filter unit and rear panel firmly; the power cannot be turned on if it is not closed securely. Cleaning the Air Filter 33