Sony VPL-FX30 Operating Instructions - Page 43
Projection distance, Lens shift range, About lens position
View all Sony VPL-FX30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Projection distance Projection image size Diagonal Width × Height 80" (2.03 m) 1.63 × 1.22 (64 × 48) 100" (2.54 m) 2.03 × 1.52 (80 × 60) 120" (3.05 m) 2.44 × 1.83 (96 × 72) 150" (3.81 m) 3.05 × 2.29 (120 × 90) 200" (5.08 m) 4.06 × 3.05 (160 × 120) Unit: m (inches) Projection distance L Standard lens VPLL-Z1024 VPLL-Z1032 2.31 × 3.69 (91 × 145) 3.85 × 5.28 (152 × 207) 5.24 × 8.01 (207 × 315) 2.89 × 4.62 (114 × 182) 4.84 × 6.62 (191 × 260) 6.59 × 10.05 (260 × 395) 3.48 × 5.56 (137 × 218) 5.83 × 7.97 (230 × 313) 7.94 × 12.09 (313 × 476) 4.36 × 6.96 (172 × 274) 7.31 × 9.98 (288 × 393) 9.95 × 15.14 (392 × 596) 5.83 × 9.29 (230 × 366) 9.77 × 13.34 (385 × 525) 13.32 × 20.24 (525 × 797) Projection distance formula D: Projected image size (Diagonal) Unit: m (inches) Lens Projection distance L (minimal length) Projection distance L (maximal length) Standard lens L=0.0294 × D - 0.0465 (L=1.1555 × D - 1.8307) L=0.0467 × D - 0.0443 (L=1.8389 × D - 1.7435) VPLL-Z1024 L=0.0493 × D - 0.0973 (L=1.9423 × D - 3.8296) L=0.0672 × D - 0.0930 (L=2.6454 × D - 3.6617) VPLL-Z1032 L=0.0673 × D - 0.1414 (L=2.6483 × D - 5.5654) L=0.1019 × D - 0.1323 (L=4.0111 × D - 5.2083) Lens shift range 33% 51% 33% VS += 51 - 1.545 × HS (HS + or HS -) [%] VS -= 0 [%] HS +=HS -=33 - 0.647 × VS + [%] Others About lens position The projection distance and lens shift range are measured with the lens position adjusted to the center. To adjust the lens position to the center, follow the procedures below: 1 Rotate the left lens shift dial left or right then align the screws with the v V marks in four places, as illustrated, for adjusting the lens horizontally. 2 Rotate the right lens shift dial clockwise until the lens is fixed, to adjust the lens vertically. 1 For adjusting Screws lens horizontally 2 v V For adjusting marks lens vertically Note Before adjusting the lens position to the center and checking whether the lens position is centered, turn off the power to prevent projected light from entering the eyes. Projection Distance and Lens Shift Range 43