Sony VPL-PX10 Operating Instructions - Page 29
The INPUT SETTING Menu, COLOR SYS System, VOLUME, Input signals and adjustable/setting items - vpl lcd
View all Sony VPL-PX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
COLOR SYS (System) Selects the color system of the input signal. AUTO: Automatically selects one of the following signals: NTSC3.58, PAL, SECAM, NTSC4.43. PAL-M/N: Automatically selects one of the following signals: PAL-M/PAL-N, NTSC3.58. Normally, set to AUTO. If the picture is distorted or colorless, select the color system appropriate to the input signal. VOLUME Adjusts the volume. The volume can be adjusted for each of INPUT A, INPUT B (VPL-PX15 only), VIDEO and S VIDEO input. The PICTURE CTRL Menu / The INPUT SETTING Menu The INPUT SETTING Menu The INPUT SETTING menu is used to adjust the input signal. Unadjustable items for a particular input signal are not displayed in the menu. When the video signal is input INPUT SETTING SHIFT ASPECT: H: 200 16:9 VIDEO V: 30 NO.01 VIDEO/60 Memory No. Signal type Input signals and adjustable/setting items Item Input signal Video or Component Video GBR S video (Y/C) CONTRAST BRIGHT COLOR (except for B & W) HUE (NTSC3.58/ 4.43 only) SHARP RGB - - - ENHANCER D. PICTURE - GAMMA - - - MODE COLOR TEMP COLOR SYS - - VOLUME RGB1) - - - - - : Adjustable/can be set - : Not adjustable/can not be set 1) The RGB signals of a computer When the RGB signal is input INPUT SETTING DOT PHASE: 0 SIZE H: 1056 SHIFT H: 200 SCAN CONV: ON INPUT-A V: 30 NO.17 800x600 Memory No. Signal type Operation 1. Select an item Use the M or m key to select the item, then press the , or ENTER key. 2. Adjust an item • When changing the adjustment level: To increase the value, press the M or , key. To decrease the value, press the m or < key. Press the ENTER key to restore the original screen. • When changing the setting: Press the M or m key to change the setting. Press the ENTER or < key to restore the original screen. DOT PHASE Adjusts the dot phase of the LCD panel and the signal input from the INPUT A/B connector. Adjust the picture further for a finer picture after the picture is adjusted by pressing the APA key. Adjust the picture to the point where it looks clearest. 29 (GB)