Sony VPL-PX10 Operating Instructions - Page 33

KEYSTONE MEM ON: The DIGIT KEYSTONE setting is stored. The data is retrieved when the projector power is turned on. The setting will remain the same every time. OFF: The DIGIT KEYSTONE is reset to 0 when the power is turned on next time. DIGIT KEYSTONE Corrects the trapezoidal distortion caused by the projection angle. If the base edge of the image is longer, set a negative value; if the upper edge is longer, set a positive value to display the image as a rectangle. INSTALLATION Set this item to reverse the picture horizontally or vertically. FLOOR-FRONT: The picture is not reversed. CEILING-FRONT: The picture is reversed horizontally and vertically. FLOOR-REAR: The picture is reversed horizontally. CEILING-REAR: The picture is reversed vertically. Note When using a mirror, be careful of how the installation is carried out since the picture may be reversed. The INSTALL SETTING Menu INPUT-B FUNC. (VPL-PX15 only) Set to ON when using the Windows CE function. Note Be sure to exit every application that is open before you switch the setting from ON to OFF. Otherwise, the system may crash and you may not be able to restart the projector. LAMP TIMER Indicates how long the lamp has been turned on. Note This only displays the time. You cannot alter the display. MENU POSITION Selects the display position of the menu from TOP LEFT, BOTTOM LEFT, CENTER, TOP RIGHT and BOTTOM RIGHT. MENU COLOR Selects the tone of the menu display from STANDARD, WARM, COOL, GREEN or GRAY. MENU BACKGRND Selects the intensity of the background picture of the menu display from DARK, STANDARD or LIGHT. 33 (GB)