Sony VPL-PX10 Operating Instructions - Page 32
The INSTALL SETTING Menu, STATUS on-screen display, INPUT-A, AUTO INPUT SEL, LANGUAGE, POWER SAVING - remote control
View all Sony VPL-PX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
The SET SETTING Menu / The INSTALL SETTING Menu STATUS (on-screen display) Sets up the on-screen display. ON: Shows all of the on-screen display. OFF: Turns off the on-screen display except for the menus, a message when turning off the power, and warning messages. For details on the warning messages, see page 40 (GB). INPUT-A Selects the computer, component or video GBR (15k RGB) signal input from the INPUT A connector. Note If the setting is not correct, "Please check INPUT-A setting." appears on the screen and the color of the picture becomes strange or the picture is not displayed. AUTO INPUT SEL When set to ON, the projector detects input signals in the following order: INPUT-A/INPUT-B (VPL-PX15 only)/VIDEO/S-VIDEO. It indicates the input channel when the power is turned on or the INPUT key is pressed. LANGUAGE Selects the language used in the menu and on-screen displays. Available languages are: English, French, German, Italian, Spanish, Japanese, Chinese, Portuguese and Korean. POWER SAVING When set to ON, the projector goes into the power saving mode if no signal is input for 10 minutes. The INSTALL SETTING Menu The INSTALL SETTING menu is used for changing the install settings of the projector. INSTALL SETTING INPUT-A KEYSTONE MEM: ON DIGIT KEYSTONE: 0 INSTALLATION: CEILING-FRONT MENU POSITION: CENTER MENU COLOR: STANDARD MENU BACKGRND: STANDARD INPUT-B FUNC.: ON LAMP TIMER: 234H INPUT-B FUNC. is displayed only for the VPLPX15. Operation 1. Select an item Use the M or m key to select the item, then press the , or ENTER key. 2. Adjust an item • When changing the adjustment level: To increase the value, press the M or , key. To decrease the value, press the m or < key. Press the ENTER key to restore the original screen. • When changing the setting: Press the M or m key to change the setting. Press the ENTER or < key to restore the original screen. IR RECEIVER Selects the remote control detectors on the front and rear of the projector. FRONT & REAR: Activates both the front and rear detectors. FRONT: Activates the front detector only. REAR: Activates the rear detector only. 32 (GB)