Stihl MS 150 C-E Instruction Manual - Page 27
Filling Chain Oil Tank, Checking Chain Lubrication
View all Stihl MS 150 C-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Filling Chain Oil Tank Preparations for assistance if necessary STIHL recommends that you have servicing and repair work carried out exclusively by an authorized STIHL servicing dealer. English Checking Chain Lubrication 2011BA059 KN 142BA069 KN N Thoroughly clean the oil filler cap and the area around it to ensure that no dirt falls into the tank. N Position the machine so that the filler cap faces up. N Open the filler cap. Filling up with chain oil N Refill the chain oil tank every time you refuel. Take care not to spill chain oil while refilling and do not overfill the tank. N Closing the Tank Cap There must still be a small amount of oil in the oil tank when the fuel tank is empty. If the oil level in the tank does not go down, the reason may be a fault in the oil supply system: Check chain lubrication, clean the oilways, contact your dealer MS 150 TC The saw chain must always throw off a small amount of oil. NOTICE Never operate your saw without chain lubrication. If the chain runs dry, the whole cutting attachment will be irretrievably damaged within a very short time. Always check chain lubrication and the oil level in the tank before starting work. Every new chain has to be broken in for about 2 to 3 minutes. After breaking in the chain, check chain tension and adjust if necessary - see "Checking Chain Tension". 25