Stihl MS 150 C-E Instruction Manual - Page 30
same time. Set Master Control
View all Stihl MS 150 C-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
English Holding the Saw starter grip snap back. Guide it slowly back into the housing so that the starter rope can rewind properly. Starting the saw WARNING Bystanders must be well clear of the general work area of the saw. 1 4 2 3006BA007 KN 3 2011BA014 KN 3006BA026 KN N Place your saw on the ground. Make sure you have a firm footing - check that the chain is not touching any object or the ground. N Hold the saw firmly with your right hand on the top handle. N Rest your right knee on the carburetor box cover. Cranking N Press the fuel pump bulb at least nine times - even if the bulb is already filled with fuel. N Pull the starter grip slowly with your right hand until you feel it engage - and then give it a brisk strong pull and push down the control handle at the same time. Do not pull out the starter rope to full length - it might otherwise break. Do not let the 28 N Push the hand guard (1) forward - the chain is locked. N Press down the trigger lockout (2) and pull the throttle trigger (3) at the same time. Set Master Control lever (4) to starting throttle position (n). N Set choke lever to required position. Choke shutter closed (l) - If the engine is cold (also use this position if the engine stopped when you opened the throttle after starting) MS 150 TC 3006BA021 KN