Symphonic TVCR13F1W Owner's Manual - Page 11
External, Input, Stalling, Katteries
![]() |
View all Symphonic TVCR13F1W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
CABLE WITH CONVERTERIDESCRAMBLER BOX If your cable service supplies you with a converter box you can use the basic connection shown here. With this connection you can record and view any channel including scrambled channels. However, channel selection must be made with the converter box. This means that channels cannot be changed using the TV/VCR Remote Control. Unattended recording is limited to one channel at a time. TO RECORD AND VIEW A SCRAMBLED/UNSCRAMBLED CHANNEL 1. Set the TV/VCR channel selector to the output chan- nel of the Cable Converter Box. (Ex. CH3) 2. Select the channel to be recorded or viewed on the Cable Converter Box. 'STALLING- THE KATTERIES 1) Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow. 2) Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings. 3) Replace the cover. O 0 EXTERNAL INPUT MODE OUT Cable Box (not supplied) IN From Cable System 75-ohm Coaxial Cable (not supplied) ANT. C) 1100010001 1100101101 11000100001 H00[1141001 MENEM Ill 30 MIMI UNWIRED MINIM HODIDE CUM HERRIN) When using an external input signal (another VCR or camcorder), connect the player's audio/video output ca- bles to the AUDIO IN, VIDEO IN jacks of your AUX TV/VCR. Then press CHANNEL A or V button or enter "00" with number but- ton so that "AUX" appears on the screen. NOTE: When using a cable converter box, you can not record one channel and view. - 11 - EN 6A30
![](/manual_guide/products/symphonic-tvcr13f1w-owners-manual-45627a1/11.png)