Symphonic TVCR13F1W Owner's Manual - Page 12

PRESET FO USE For the first time you may want to select language (English or Espatio1=Spanish) and preset the tuner to scan only the channels you receive in your area. You must use the remote control for the following steps. NOTE: Channel memory programming is not needed when using a converter/descrambler box. DELETING (OR ADDING PRESET CHANNEL The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.) PRESET FOR THE FIRST TIM 1 Plug the TVNCR power cord Plug the TV/VCR power cord into a standard AC outlet. I Select "CHANNEL SET UP' Press MENU button repeatedly to point to "CHANNEL SET UP". Then, press SELECT button. -MENU- TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK Is CHANNEL SET UP USER'S SET UP LANGUAGE [ENGLISH! CAPTION [OFF] TIME SEARCH 2 Turn on the TVNCR Press POWER button to turn on the TV/VCR. 3 Selept "ENGLISH" or "ESPAIKIOL" Select "ENGLISH" or "ESPAROL=Spanish" using CH A or V button. "[ ]" marks indicate the selected language. - SETUP Is LANGUAGE !ENGLISH) ESPANOL AUTO PRESET 4 Begin auto preset Press MENU button to point to "AUTO PRESET". - SET UP LANGUAGE [ENGLISH] ESPANOL Is AUTO PRESET Then press SELECT button. The tuner scans and memorizes all the active channels in your area. NOTES: • The TV/VCR distinguishes between standard TV channels and CATV automatically. • If you want to play or record a video tape BEFORE presetting the tuner, you must press MENU button. To preset the tuner again„ see "AUTO PRESET • AGAIN". 2 Select "ADD/DELETE CH" Press MENU button repeatedly to point to "ADD/DELETE CH". Press SELECT button. - CHANNEL SET UP - TV/CATV AUTO PRESET [ TV 1 Is ADD/DELETE CH 3 Enter the desired channel number Press CH A or V button repeatedly until your desired channel number is appeared. (You can also use the number buttons to enter it) (Example: CH8) ADD/DELETE CH 08 . ( TV ) 4 Delete (or add) it from (into) memory Press ADD/DELETE button. The channel number changes to light red. The channel is deleted from memory. • To delete another channel, repeat steps [3] and [4]. • If you press the ADD/DELETE button again, the channel is memorized again. 5 After scanning The tuner stops on the lowest memorized channel. (TV mode: from CH 02/ CATV mode: from CH 01) If you want to recall the selected channels, you can select the desired channel directly with the remote control number button or CH A or V. TO RETURN TO TV MODE WHEN SCANNING Added channel is in light blue. Deleted channel is in light red. 5 Exit the channel setup mode Press MENU button to returns to TV mode. NOTE: To confirm that channel(s) has been deleted or added, press CH A or V button. Press MENU button in scanning mode. - 12 - EN 6A30