TEAC AD-RW900 AD-RW900 - Page 18

LINE IN PHONO Display (2) Changing the display (CD/USB mode) Basic Operation Turning the unit on or off During playback in CD mode or USB mode, each time the DISPLAY button is pressed, the display changes as follows: Press the POWER button to turn the unit on or off. When the unit turns on, the display lights. Check the POWER ON START switches that determine what the unit does when the power is turned on. Audio CD Remaining time of current track (min./sec.) Total elapsed time of the disc (min./sec.) Total remaining time of the disc (min./sec.) Currently playing track number and elapsed time of current track (min./sec.) MP3 disc/USB File name Title Artist Album Currently playing folder and file number, elapsed time of current track (min./sec.), and currently playing file name When the power is turned on, and the POWER ON START (OFF-PLAY-REC) switch for the timer is set to PLAY or REC or The source set with the POWER ON START (CD-TAPEUSB) switch starts playback/recording. The timer recording can only record to cassette tape (pages 45-47). < "Title No" (title information unavailable), "Album No" (album information unavailable) or "Artist No" (artist information unavailable) appears when there is no information appears when the unit cannot read the information. When the power is turned on, and the POWER ON START (OFF-PLAY-REC) switch for the timer is set to OFF < The display of this unit can only show single-byte letters and numbers. If a file name uses Japanese, Chinese or other doublebyte characters, playback is possible but the name will not be shown correctly. In such cases, " " is displayed. The source set with the POWER ON START (CD-TAPEUSB) switch becomes the active source. < When you do not want to use the timer, be sure to set the OFFPLAY-REC switch to the OFF position to prevent accidentally recording over an important cassette tape. 18