TEAC AD-RW900 AD-RW900 - Page 39
TEAC AD-RW900 Manual
View all TEAC AD-RW900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
LINE IN PHONO Recording on a USB Flash Drive (1) Using this unit, the contents of CDs, cassette tapes and audio input from other devices by the LINE IN, PHONO jacks and DIGITAL IN terminal can be converted to MP3 format and recorded on USB flash drives. < This unit can also record to CDs and cassette tapes, but it cannot simultaneously record to these media and USB flash drives. < Timer recording cannot use CD or USB recording media. < You cannot record to an external USB flash drive if there is no free space or the device is write-protected. < Before recording, check the remaining capacity of the USB flash drive using a PC. You cannot check the remaining memory capacity with this unit. 1 Insert a USB flash drive into the unit's USB port. CAUTION Do not disconnect the USB flash drive during recording.Do not turn the unit off or disconnect the power cord during recording. Doing so might cause damage to the AD-RW900 and the connected USB flash drive. About recorded MP3 files < When recording, a "RECORD" folder is automatically created and a subfolder for each source ("CD", "TAPE" or "LINE") is also created in the "RECORD" folder. MP3 files are added to the corresponding subfolder. < File names are assigned automatically with a numerical endings in order. When recorded from a CD "CD001.MP3", "CD002.MP3" ...If there are, for example, files named "CD004.MP3" and "CD009.MP3" in the USB folder already, and you make a recording, the next new file will be named "CD010.MP3". M If you start recording a track/file that has already started playing, the elapsed time of the track/file being recorded that appears on the display will be the same as the elapsed time of the current track that is also shown on the display. When recorded from a cassette tape "T001.MP3", "T002.MP3" ...When record from an external source "L001.MP3", "L002.MP3" ...< During recording from tape or external source input, you can divide the file manually (page