TEAC AD-RW900 AD-RW900 - Page 43
TEAC AD-RW900 Manual
View all TEAC AD-RW900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
3 Set the reverse mode setting using the REV MODE switch, and set the recording direction. 6 Adjust the recording level. Before recording, adjust the recording level. Failure to do so could cause the recorded sound to be distorted or noisy. 1. Play the source (external source) to be recorded. 2. Use the REC LEVEL knob to adjust the recording level so that the loudest sound does not continually exceed the "0" indicator on the peak level meter. To record on a single tape side, set the REV MODE switch to u, and set the recording direction using the Forward (t) or Reverse (g) play button. Then press the TAPE Stop (H) button. To record on both tape sides, set the REV MODE switch to j or p, and set the recording direction to t. If you set the recording direction to g, only "side B" will be recorded on. 4 Set the DOLBY NR (noise reduction) switch to ON or OFF. < Different sources to be recorded have different volumes. In order to record at the optimal volume for each source, it is necessary to adjust the recording level for each source. 7 Prepare the recording source. For information about the DOLBY NR function, see page