TEAC AD-RW900 AD-RW900 - Page 22

Listening to Files on a USB Flash Drive (MP3/WMA) CAUTION Never turn the unit off or disconnect a USB flash drive when it is being accessed, for example, during writing, playback, recording or the erasure of files. Doing so could damage the AD-RW900 and the connected USB flash drive. < This section uses MP3 file as an example to explain the operation process; the same process also needs to be followed when WMA file is used. Pausing playback temporarily 1 Press the SOURCE button repeatedly to select "USB". Press the USB Play/Pause (t/J) button during playback to stop playback at the current position. To resume playback, press the USB Play/Pause (t/J) button again. Stopping playback < When a different source is selected, starting USB playback automatically selects the USB mode. 2 Connect an external USB flash drive to the USB port of this unit. Press the USB Stop (H) button to stop playback. Search for a part of a file Reading the USB device takes a few seconds. < If no MP3 file is on the USB device, "NO MUSIC FILE" is displayed. 3 Press the USB Play/Pause (t/J) button to start playback. Hold down During playback, hold down a USB Search (m or ,) button to search for a part of a file. Pressing and holding a Search button increases the search speed. Release it when you find the beginning of the part that you want to hear. < When playback of all the files has finished, the unit stops automatically. < MP3 files that are not put in folders are automatically put in the "ROOT" folder. Playback starts from the first file in the ROOT folder. < See page