TP-Link AC3200 Archer C3200 V1 User Guide - Page 33
Customize Your Settings, Play the Media on Your USB Disk, To Only Share Specific Content
View all TP-Link AC3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Insert your USB storage device into the router's USB port directly or using a USB cable. Wait several seconds until the USB LED becomes solid on. Tips: • If you use USB hubs, make sure no more than four devices are connected to the router. • If the USB storage device requires using bundled external power, make sure the external power has been connected. • If you use a USB hard drive, make sure its file system is FAT32, exFat, NTFS and HFS+. • Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to Advanced > USB Settings > Device Settings and click Safety Remove. 2. Play the Media on Your USB Disk Now the DLNA-supported devices (such as your computer and pad) connected to the router can detect and play the media files on the USB disks. 1. Open the Windows Media Player. 2. Click the media server name (such as Genie Media Severs) under the list of Other Libraries, then you can directly view photos, play music and watch movies that you share on the USB disks. Windows computer pad • Use a third-party DLNA-supported player. 7. 3. 2. Customize Your Settings To Only Share Specific Content By default, Share All is enabled so all content on the USB disk is shared. If you want to only share specific folders, follow the steps below: 1. Visit http://tplinkwifi.net, then log in with the username and password you set for the router. 2. Go to Advanced > USB Settings > Sharing Access. 3. Focus on the section of Folder Sharing. Click the button to disable Share All, then click Add to add a new sharing folder. 4. Select the Volume Name and Folder Path, then enter a Folder Name as you like. 5. Select Enable Media Sharing and click OK. Chapter 7 . USB Application 30