TP-Link Archer C50 Archer C50 V1 User Guide - Page 123
Enable MLD Proxy
View all TP-Link Archer C50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
3) PPPoEv6 Archer C50 AC1200 Wireless Dual Band Router Figure 4-105 PPPoEv6 PPP Username/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. Authentication Type - Choose one authentication type from AUTO-AUTH, PAP, CHAP and MS-CHAP. Addressing Type - There are two types of assignation for IPv6 address: SLAAC (Stateless address auto-configuration) and DHCPv6 (Dynamic Host Configuration Protocol for IPv6) Server. MTU(Bytes) - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs, you may need to modify the MTU. But this is rarely required, and should not be done unless you are sure it is necessary for your ISP connection. Enable MLD Proxy - Enable the Multicast Listener Discovery (MLD) Proxy function if you need. Use IP address specified by ISP - Input a static IPv6 address from the ISP. Set IPv6 DNS Server manually - Enter the IP address of the IPv6 DNS server and secondary IPv6 DNS server. - 112 -