TP-Link Archer C50 Archer C50 V1 User Guide - Page 55
Archer C50, Encryption, WPA-PSK, Automatic, Wireless Password, Group Key Update Period, WPA/WPA2-
View all TP-Link Archer C50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Archer C50 AC1200 Wireless Dual Band Router Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select either Automatic, or TKIP or AES as Encryption. Note: If you check the WPA/WPA2-Personal radio button and choose TKIP encryption, you will find a notice in red as shown in Figure 4-21. Figure 4-21 WPA/WPA2 - Personal Wireless Password - You can enter ASCII characters between 8 and 63 characters or 8 to 64 Hexadecimal characters. The default password is the same with the default PIN code, which is labeled on the bottom of the router or can be found in Figure 4-16. Group Key Update Period - Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update. WPA/WPA2- Enterprise - It's based on Radius Server. Version - you can choose the version of the WPA security on the drop-down list. The default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2 (WPA version 2) automatically based on the wireless station's capability and request. Encryption - You can select either Automatic, or TKIP or AES. Note: If you check the WPA/WPA2-Enterprise radio button and choose TKIP encryption, you will find a notice in red as shown in Figure 4-22. Figure 4-22 WPA/WPA2 - Enterprise Radius Server IP - Enter the IP address of the Radius server. - 44 -