TP-Link Archer C50 Archer C50 V1 User Guide - Page 75
DHCP Settings
View all TP-Link Archer C50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Archer C50 AC1200 Wireless Dual Band Router storage sharing servers. Guest Network Isolation -. If enabled, guests are isolated from each other. Guest Network Bandwidth Control - If enabled, the Guest Network Bandwidth Control rules will take effect. Band Select/Guest Network - Select the wireless network band (2.4G/5G) and enabled or disable its Guest Network function. Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be assigned to all wireless devices in your Guest Network. Max Guest number - The maximum of guests at the same time, Security - You can configure the security of Guest Network here. Access Time - During this time the wireless stations could accessing the AP. Note: The range of bandwidth for Guest Network is calculated according to the setting of Bandwidth Control on the page "Bandwidth Control->Control Settings". 4.9 DHCP Figure 4-44 The DHCP menu There are three submenus under the DHCP menu (shown in Figure 4-44): DHCP Settings, DHCP Clients List and Address Reservation. Click any of them, and you will be able to configure the corresponding functions. 4.9.1 DHCP Settings Choose menu "DHCP → DHCP Settings", you can configure the DHCP Server on the page as shown in Figure 4-45.The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to the router on the LAN. - 64 -