TP-Link Archer C50 Archer C50 V1 User Guide - Page 36
Quick Setup, Network
View all TP-Link Archer C50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Archer C50 AC1200 Wireless Dual Band Router 4.3 Quick Setup Please refer to 3.2 Quick Installation Guide. 4.4 Network Figure 4-2 the Network menu There are three submenus under the Network menu (shown in Figure 4-2): WAN, LAN and MAC Clone. Click any of them, and you will be able to configure the corresponding function. 4.4.1 WAN Choose menu "Network → WAN", you can configure the IP parameters of the WAN on the screen below. 1. If your ISP provides the DHCP service, please choose Dynamic IP type, and the router will automatically get IP parameters from your ISP. You can see the page as follows (Figure 4-3): Figure 4-3 WAN - Dynamic IP - 25 -
Archer C50
AC1200 Wireless Dual Band Router
- 25 -
4.3
Quick Setup
Please refer to
3.2 Quick Installation Guide
.
4.4
Network
Figure 4-2 the Network menu
There are three submenus under the Network menu (shown in Figure 4-2):
WAN
,
LAN
and
MAC
Clone
. Click any of them, and you will be able to configure the corresponding function.
4.4.1
WAN
Choose menu “
Network
→
WAN
”, you can configure the IP parameters of the WAN on the
screen below.
1.
If your ISP provides the DHCP service, please choose
Dynamic IP
type,
and the router will
automatically get IP parameters from your ISP. You can see the page as follows (Figure
4-3):
Figure 4-3 WAN – Dynamic IP