TP-Link Archer C50 Archer C50 V1 User Guide - Page 43
Enable IGMP Proxy
View all TP-Link Archer C50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Archer C50 AC1200 Wireless Dual Band Router Figure 4-8 WAN - L2TP/Russia L2TP Username/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. Addressing Type - Choose the addressing type given by your ISP, either Dynamic IP or Static IP. Click the Connect button to connect immediately. Click the Disconnect button to disconnect immediately. MTU(Bytes) - The default MTU size is "1460" bytes, which is usually fine. It is not recommended that you change the default MTU Size unless required by your ISP. Enable IGMP Proxy - IGMP (Internet Group Management Protocol) is used to manage multicasting on TCP/IP networks. Some ISPs use IGMP to perform remote configuration for client devices, such as the modem router. The default value is enabled, and if you are not sure, please contact your ISP or just leave it. Always on - In this mode, the Internet connection will be active all the time. Connect on Demand - You can configure the router to disconnect from your Internet connection after a specified period of inactivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to automatically re-establish your connection as soon as you attempt to access the Internet - 32 -