TP-Link RE305 RE305EU V1 User Guide - Page 19

Specify DHCP Server Settings, By default

Get TP-Link RE305 PDF manuals and user guides View all TP-Link RE305 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Chapter 3 Customize Your Network 5. Click Save. 3. 4. Specify DHCP Server Settings By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the extender acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices from the IP Address Pool. You can change the settings of the DHCP Server if necessary. 1. Visit http://tplinkrepeater.net, and log in with the username and password you set for the extender. 2. Go to Settings > Network. ¾¾ To specify the IP address that the extender assigns: 1. Select Auto (recommended) or On to enable the DHCP Server. 2. Enter the starting and ending IP addresses in the IP Address Pool. 3. Enter other parameters if the ISP offers. The Default Gateway is automatically filled in and is the same as the LAN IP address of the extender. 4. Click Save. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
16
Chapter 3
Customize Your Network
5. Click
Save
.
3. 4.
Specify DHCP Server Settings
By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and
the extender acts as a DHCP server; it dynamically assigns TCP/IP parameters to client
devices from the IP Address Pool. You can change the settings of the DHCP Server if
necessary.
1. Visit
http://tplinkrepeater.net
, and log in with the username and password you set for
the extender.
2. Go to
Settings
>
Network
.
¾
To specify the IP address that the extender assigns:
1. Select
Auto
(recommended) or
On
to enable the DHCP Server.
2. Enter the starting and ending IP addresses in the
IP Address Pool
.
3. Enter other parameters if the ISP offers. The
Default Gateway
is automatically filled
in
and is the same as the LAN IP address of the extender.
4. Click
Save
.