TP-Link T2600G-28MPS T2600G-28MPSUN V1 User Guide - Page 158
Multicast, IGMP Snooping, Port Config
View all TP-Link T2600G-28MPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
9.1.2 Port Config On this page you can enable or disable the IGMP Snooping and Fast Leave feature for ports of the switch. Choose the menu Multicast →IGMP Snooping →Port Config to load the following page. Figure 9-6 Port Config The following entries are displayed on this screen: Port Config UNIT:1/LAGS: Select: Port: IGMP Snooping: Fast Leave: LAG: Click 1 to configure the physical ports. Click LAGS to configure the link aggregation groups. Select the desired port for IGMP Snooping feature configuration. It is multi-optional. Displays the port of the switch. Select Enable/Disable IGMP Snooping for the desired port. Select Enable/Disable Fast Leave feature for the desired port. If Fast Leave is enabled for a port, the switch will immediately remove this port from the multicast group upon receiving IGMP leave messages. Displays the LAG number which the port belongs to. 147