TP-Link T2600G-28MPS T2600G-28MPSUN V1 User Guide - Page 211
DHCP Server
View all TP-Link T2600G-28MPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
1) Configure the Excluded IP address which cannot be assigned by the switch, e.g. web server's IP, broadcast IP of subnet and gateway's IP. 2) Specify IP address for specific clients, and then the switch will supply these IP address to them only forever. 3) Configure the IP pool in which the IP address can be assigned to the clients. The DHCP Server, allowing the clients in all VLANs to get the IP address from the server automatically, is implemented on the DHCP Server, Pool Setting, Manual Binding, Binding Table and Packet Statistics pages. 10.4.1 DHCP Server This page allows you to enable the DHCP Server function, configure the Excluded IP Address which cannot be assigned by the switch in every network. Choose the menu Routing→ DHCP Server→ DHCP Server to load the following page. Figure10-16 DHCP Server The following entries are displayed on this screen: Global Config DHCP Server: Option 60: Enable/Disable the switch as a DHCP server. Configure DHCP option 60. If this option is configured, DHCP server will response packets containing this option if the client running CAPWAP protocol requests this option. 200