TP-Link T2600G-28MPS T2600G-28MPSUN V1 User Guide - Page 174
MLD Snooping Status, 1Q VLAN, VLAN Config, Create, Multicast, MLD Snooping, Global, Config,
View all TP-Link T2600G-28MPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Last Listener Query Interval: Last Listener Query Count: MLD Snooping Status Description: Member: Enter the interval between the switch sends out MASQs. Enter the number of MASQs that the switch sends before aging out a multicast address when there is no MLD report response. Displays MLD Snooping status. Displays the member of the corresponding status. Note: 1. Configurations of the Router Port Time and Member Port Time in 8.2.3 VLAN Config override their global configurations here. 3. Before creating a Multicast VLAN, you should enable the MLD snooping function in this VLAN in 8.2.3 VLAN Config. Configuration Procedure of Multicast VLAN: Step Operation Description 1 Create VLAN. Required. On the VLAN →802.1Q VLAN →VLAN Config page, click the Create button to create a VLAN. Enter the VLAN ID and the description for the VLAN. Meanwhile, specify its member ports. 2 Enable MLD Snooping Required. On the Multicast →MLD Snooping →Global globally. Config page, enable the MLD Snooping function globally. 3 Enable MLD Snooping in the Required. On the Multicast →MLD Snooping →VLAN VLAN. Config page, specify the VLAN ID as the VLAN created in step 1. 4 Enable the Multicast VLAN. Required. On the Multicast →MLD Snooping →Multicast page, enable the Multicast VLAN function and specify the Multicast VLAN ID as the VLAN specified in Step 1. 163