TP-Link TL-SG3109 User Guide - Page 41

Receiving an IP Address from a DHCP Server, show ip interface

Get TP-Link TL-SG3109 - Switch PDF manuals and user guides
UPC - 845973020484
View all TP-Link TL-SG3109 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family Installation Guide accounting (AAA) mechanism, and includes the following topics:  Receiving an IP Address from a DHCP Server  Receiving an IP Address from a BOOTP Server  Security Management and Password Configuration When configuring or receiving IP addresses through DHCP and BOOTP, the configuration received from these servers includes the IP address, and may include a subnet mask and default gateway. 4.5.1 Receiving an IP Address from a DHCP Server When using the DHCP protocol to retrieve an IP address, the device acts as a DHCP client. To receive an IP address from a DHCP server, perform the following steps: 1. Select and connect any port to a DHCP server or to a subnet that has a DHCP server on it, in order to retrieve the IP address. 2. Enter the following commands to use the selected port for receiving the IP address. In the following example, the commands are based on the port type used for configuration. console# configure console(config)# interface vlan 1 console(config-if)# ip address dhcp hostname admin-host console(config-if)# exit console(config)# 3. To verify the IP address, enter the show ip interface command at the system prompt as shown in the following example. 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
34
Gigabit Managed Switch Family Installation Guide
TL-SG3109/TL-SL3428/TL-SL3452
accounting (AAA) mechanism, and includes the following topics:
Receiving an IP Address from a DHCP Server
Receiving an IP Address from a BOOTP Server
Security Management and Password Configuration
When configuring or receiving IP addresses through DHCP and BOOTP, the
configuration received from these servers includes the IP address, and may
include a subnet mask and default gateway.
4.5.1
Receiving an IP Address from a DHCP Server
When using the DHCP protocol to retrieve an IP address, the device acts as
a DHCP client. To receive an IP address from a DHCP server, perform the
following steps:
1.
Select and connect any port to a DHCP server or to a subnet that has a
DHCP server on it, in order to retrieve the IP address.
2.
Enter the following commands to use the selected port for receiving the IP
address. In the following example, the commands are based on the port
type used for configuration.
console#
configure
console(config)#
interface vlan
1
console(config-if)#
ip address dhcp
hostname
admin-host
console(config-if)#
exit
console(config)#
3.
To verify the IP address, enter the
show ip interface
command at the
system prompt as shown in the following example.