TP-Link TL-SG3109 User Guide - Page 43

36

Gigabit Managed Switch Family Installation Guide

TL-SG3109/TL-SL3428/TL-SL3452

Note

When the device reboot begins, any input at the ASCII terminal or keyboard

automatically cancels the BOOTP process before completion, and the device

does not receive an IP address from the BOOTP server.

The following example illustrates the process:

console>

enable

console#

delete startup-config

Startup file was deleted

console#

reload

You haven’t saved your changes. Are you sure you want to continue

(Y/N)[N]?

This command will reset the whole system and disconnect your current

session. Do you want to continue (Y/N)[N]?

***************************************************

*****************

SYSTEM RESET

*****************

***************************************************

3.

To verify the IP address, enter the

show ip interface

command. The

device is now configured with an IP address.

4.5.3

Security Management and Password Configuration

System security is handled through the AAA (Authentication, Authorization,

and Accounting) mechanism that manages user access rights, privileges, and

management methods. AAA uses both local and remote user databases. Data

encryption is handled through the SSH mechanism.

The system is delivered with no default password configured; all passwords

are user-defined. If a user-defined password is lost, a password recovery

procedure can be invoked from the Startup menu. The procedure is applicable

for the local terminal only and allows a one-time access to the device from the

local terminal with no password entered.

Section	Page
Package contents	8
Section 1: Introduction	9
1.1 Intended Audience	9
1.2 Agreement	9
1.3 Guide Overview	9
Section 2. Device Description	10
2.1 Features	10
2.2 TP-Link TL-SG3109 Description	11
2.3 TP-Link TL-SL3428 Description	13
2.4 TP-Link TL-SL3452 Description	15
2.5 Back Panel	17
2.6 Device Hardware Interfaces	17
2.6.1 RJ-45 Base-T Fast Ethernet Ports	17
2.6.2 SFP Port	18
2.6.3 RS-232 DB-9 Console Port	19
2.7 Cable, Port, and Pinout Information	19
2.7.1 Pin Explain For RJ-45 Connector	19
2.7.2 SFP Connector	21
2.8 Physical Dimensions	21
Section 3. Mounting Device	22
3.1 Preparing for Installation	22
3.1.1 Installation Precautions	22
3.1.2 Site Requirements	23
3.1.3 Unpacking	23
3.1.3.1 Package Contents	23
3.1.3.2 Unpacking Essentials	24
3.2 Installing the Device	24
3.2.1 Desktop or Shelf Installation	25
3.2.2 Rack Installation	25
3.3 Connecting the Device	27
3.3.1 Connecting the Switch to a Terminal	27
3.3.2 AC Power Connection	28
Section 4. Starting and Configuring the Device	29
4.1 Configuring the Terminal	29
4.2 Installation Procedure	30
4.2.1 Device Port Default Settings	31
4.3 Booting the Device	31
4.4 Configuration Overview	33
4.4.1 Initial Configuration	34
4.4.1.1 Static IP Address and Subnet Mask	35
4.4.1.2 Assigning Static IP Addresses on a default VLAN	36
4.4.1.3 User Name	37
4.4.1.4 SNMP Community Strings	38
4.5 Advanced Configuration	40
4.5.1 Receiving an IP Address from a DHCP Server	41
4.5.2 Receiving an IP Address from a BOOTP Server	42
4.5.3 Security Management and Password Configuration	43
4.5.3.1 Configuring Security Passwords Introduction	44
4.5.3.2 Configuring an Initial Console Password	44
4.5.3.3 Configuring an Initial Telnet Password	45
4.5.3.4 Configuring an Initial SSH password	45
4.5.3.5 Configuring an Initial HTTP Password	46
4.5.3.6 Configuring an initial HTTPS Password	46
4.6 Startup Procedures	46
4.6.1 Software Download [Option 1]	48
4.6.1.1 Software Download through TFTP Server	49
4.6.2 Erasing the Flash File [Option 2]	53
4.6.3 Password Recovery [Option 3]	53
4.6.4 Enter Diagnostic Mode [Option4]	54

TP-Link TL-SG3109 User Guide - Page 43

Security Management and Password Configuration - default password

Page 43 highlights