TRENDnet THA-103AC User's Guide - Page 19

Browser Management

Page 19 highlights

TRENDnet User's Guide Browser Management The Wireless and Administrator features can be managed via web browser and below are the default values for the device. This information can also be found on the preset sticker. Default IP Default Name/ID Default Password Default SSID Default Wireless Key http://192.168.10.100 admin admin THA‐103AC_24G_xxxx THA‐103AC_5G_xxxx password 1. Plug THA‐103AC to a wall outlet and power it on. Connect your computer or laptop to the device's default SSID. 2. Open a browser and type http://192.168.10.100 to access the configuration page if it has not been modified or connected to other wireless network. 3. The web browser will prompt the login screen. If you're logging in for the first time before the unit is configured, it will lead you to the set password page; password change is recommended. Once changed, it will prompt you to login again, use the new password to login. THA‐103AC Mode Device Mode When this option is selected, the wireless repeater function will be turned off. The device can still remain connection to the wireless router or access point and work as a simple power switch. Repeater Mode This option is selected by default. © Copyright 2015 TRENDnet. All Rights Reserved. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

© Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
THA
103AC
17
Browser Management
The Wireless and Administrator features can be managed via web browser and below
are the default values for the device. This information can also be found on the preset
sticker.
Default IP
Default Name/ID
admin
Default Password
admin
Default SSID
THA
103AC_24G_xxxx
THA
103AC_5G_xxxx
Default Wireless Key
password
1.
Plug THA
103AC to a wall outlet and power it on. Connect your computer or
laptop to the device’s default SSID.
2.
Open a browser and type
to access the configuration
page if it has not been modified or connected to other wireless network.
3.
The web browser will prompt the login screen. If you’re logging in for the first
time before the unit is configured, it will lead you to the set password page;
password change is recommended. Once changed, it will prompt you to login
again, use the new password to login.
Mode
Device Mode
When this option is selected, the wireless repeater function will be turned off. The
device can still remain connection to the wireless router or access point and work as a
simple power switch.
Repeater Mode
This option is selected by default.