TRENDnet TV-IP420P Users Guide - Page 31
Secondary DNS
View all TRENDnet TV-IP420P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
TRENDnet User's Guide TV‐IP420P Network Interface MAC Address: Click this button to reboot this camera. Duplex and Speed: MTU: Primary DNS: Choose one of the Ethernet duplex and speed to match your network. Default: auto. Maximum transmission unit. The maximum field size in the Ethernet packet. Enter your first IPv4 or IPv6 DNS server address Secondary DNS: Enter your second IPv4 or IPv6 DNS server address Port You can change the service port numbers of TV‐IP420P and enable/disable RTSP or HTTPS services. IPv4 DHCP: Check this box if the IP address is assigned by DHCP server. IPv4 Address: The IPv4 dynamic or static address Subnet Mask: Network range of the subnet Default Gateway: The default route going further from TV‐IP420P IPv4 subnet IPv6 IPv6 Mode: IPv6 Address: Prefix Length: Default Gateway: Choose Manual, DHCP, or Route Advertisement. Click View Route Advertisement to find a route advertisement. IPv6 address of TV‐IP420P Length of network prefix The default route going further from TV‐IP420P IPv6 subnet Port Numbers HTTP Port: RTSP Port: HTTPS Port: The default web access port. You can change the port number. However, you cannot disable the web service. The default port number is 80. The Real‐Time Streaming Protocol port for video streaming. You can change the port number or disable the service by uncheck the box. The default port number is 554. The secured web service port. You can change the port number, or you can disable the service by uncheck the box. The default port number is 443. Click Save to save the changes © Copyright 2016 TRENDnet. All Rights Reserved. 31