TRENDnet TV-IP420P Users Guide - Page 53
PTZ Pan/Tilt/Zoom
View all TRENDnet TV-IP420P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
TRENDnet User's Guide PTZ (Pan/Tilt/Zoom) Basic Basic Parameters Enable Proportional Pan: Preset Speed: Keyboard Control Speed: If you enable this function, the pan/tilt speeds change according to the amount of zoom. You can set the speed of defined preset from 1 to 8. Define the speed of PTZ control by a keyboard as Low, Normal or High. © Copyright 2016 TRENDnet. All Rights Reserved. TV‐IP420P Auto Scan Speed: Max. Tilt‐angle: PTZ OSD Auto Flip: The camera provides 5 scan modes: auto scan, tilt scan, frame scan, random scan and panorama scan. The scan speed can be set from level 1 to 40. The maximum angle that the camera can revolve in the tilt direction is adjustable. The values range from (0‐90) to (‐5‐90) You can enable/disable the auto flip function Zoom Status: Set the OSD duration of zooming status as 2 seconds to 10 seconds, always on or off. PT Status: Preset Status: Set the angle display duration white panning and tilting as 2 seconds to 10 seconds, always on or off. Set the preset name display duration as 2 seconds to 10 seconds, always on or off. POWER OFF MEMORY Set Resume Time Point: The camera can resume its previous PTZ status or actions after it is restarted from a power‐off. You can set the time point of which the camera resumes its PTZ status from 30 seconds up to 600 seconds before power‐off. Click Save to save the changes 53