TRENDnet TV-IP420P Users Guide - Page 9
Setup Your Camera with CD
![]() |
View all TRENDnet TV-IP420P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
TRENDnet User's Guide TV‐IP420P Setup Your Camera with CD 1. Insert the Installation CD‐ROM into your computer's CD‐ROM drive to initiate the Auto‐Run program. Choose your preferred language and then click the Install Camera. 3. Connect a PoE capable network cable to the camera's network port and then to a PoE switch and wait for the camera to boot up, click Next. * A power adapter (sold separately) can be used instead of PoE switch. 2. Write down the MAC Address of the camera. 4. Wait while the utility is searches for the camera. © Copyright 2016 TRENDnet. All Rights Reserved. 9
![](/manual_guide/products/trendnet-tvip420p-user-s-guide-95efe9c/9.png)
TRENDnet User’s Guide
TV
‐
IP420P
© Copyright 2016 TRENDnet. All Rights Reserved.
9
Setup Your Camera with CD
1.
Insert the Installation CD
‐
ROM into your computer’s CD
‐
ROM drive to
initiate the Auto
‐
Run program. Choose your preferred language and then
click the
Install Camera
.
2.
Write down the MAC Address of the camera
.
3.
Connect a PoE capable network cable to the camera’s network port and
then to a PoE switch and wait for the camera to boot up, click
Next.
* A power adapter (sold separately) can be used instead of PoE switch.
4.
Wait while the utility is searches for the camera.