Thermador CIT36YWBB Instructions for Use - Page 25
MyZone®
![]() |
View all Thermador CIT36YWBB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
2. Open the cap on the cooking sensor. Remove the battery from the lower section of the casing and insert a new battery. In doing so, pay attention to the correct alignment of the battery terminals. Operation en-us 4. Reattach the silicone cover back to the lower section of the cooking sensor casing. ! + Note: Do not use any metal objects to remove the battery. Do not touch the battery terminals. 3. Close the cap on the cooking sensor. The indentations for the screws on the cap must be aligned with the indentations on the lower section of the casing. Tighten the screws with a screwdriver. Note: Use only high-quality CR2032 batteries in order to guarantee a long service life. Declaration of Conformity BSH Home Appliances Corporation hereby declares that the appliance with wireless cooking sensor function meets the basic requirements and other relevant provisions of the Directive 2014/53/EU. A detailed Declaration of Conformity in accordance with Directive RED can be found at www.thermador.com on the product page for your appliance under "Additional documents. The logos and the Bluetooth® brand are registered trademarks and property of Bluetooth SIG, Inc. These trademarks are used by BSH Home Appliances Corporation under licence. All other marks and trade names are the property of the respective companies. 6.13 MyZone® With this function, five default power levels are displayed when you place an item of cookware cooking surface. This allows you to change the power level during cooking by moving the cookware forward or backward. The default power levels are 1.0, 3.0, 5.0 7.0 and 9.0. General information: ¡ You can change the default power levels in the basic settings menu. → "Basic settings", Page 27 ¡ If the function is not available in the settings area, the cookware may be too big. Use a smaller item of cookware. ¡ If the function does not activate when you select the power level, the appliance may have reached its maximum power consumption. Refer to the information on power management. → "Basic settings", Page 27 ¡ Refer to the information on cooking with induction for information on the type, size and positioning of the cookware. → Page 8 Activating MyZone® 1. Place the cookware on the cooking surface. 2. Touch to enter the cookware mode menu . 25
![](/manual_guide/products/thermador-cit36ywbb-instructions-use-cb81f2b/25.png)