Home » Thermador Manuals » Cooktops » Thermador CIT36YWBB » Manual Viewer

Thermador CIT36YWBB Instructions for Use - Page 27

Panel lock, Pause function, Basic settings

View all Thermador CIT36YWBB manuals

Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

a The display shows the power level for the entire cooking zone. a If you have selected a setting with only one warm area, the residual heat indicator is displayed in for the area with no power level. Changing the power level during Teppanyaki mode You can change the preset power levels while you are cooking. ▶ Touch the area you want to change and set a different power level in the display. Note: If you change the orientation of the Teppanyaki griddle, select the appropriate setting for the new position on the cooking zone display. Deactivating Teppanyaki mode 1. Touch the power level in the cooking zone display. 2. Touch and select a different cookware mode. 3. Touch to confirm. 6.15 Panel lock You can use the panel lock to prevent the cooktop from being turned on accidentally. Activating the panel lock Requirement: The cooktop is turned on. 6.17 Basic settings You can configure your appliance to meet your needs. Operation en-us ▶ Touch an hold for approximately 4 seconds. a lights up. a A signal sounds. a The control panel is locked. Deactivating the panel lock Requirement: The cooktop is turned on. ▶ Touch an hold for approximately 4 seconds. a lights up. a A signal sounds. a The control panel is unlocked. 6.16 Pause function With the Pause function, you can interrupt a cooking process, for example to clean the control panel without changing any settings. When you activate the pause function: ¡ All currently active settings light up on the display. ¡ The appliance pauses heating. ¡ If the Kitchen timer or Stopwatch is set, it will continue running, but you cannot change the timer settings. ¡ The pause function has no effect on the main switch. You can turn off the cooktop at any time. Activating the pause function ▶ Touch . a The cooktop is locked for 30 minutes. a is displayed in the function bar, only if a cooking process has been started. Deactivating the pause function 1. Touch . 2. Touch . a The cooking process is resumed. Notes ¡ If you do not continue cooking within 30 minutes, the cooktop turns off automatically. ¡ If you move cookware across the cooking surface while the pause function is active, the settings may be lost. Basic settings overview Here you can find an overview of the basic settings and the preset factory settings. Display Setting Brightness Start screen Sounds SapphireGlow™ MyZone - power levels Options Change the brightness of the touchscreen display. Choose whether or not the brand logo will be displayed when you turn on the cooktop. Select which signal tones you want the appliance to use. Change the default power levels of the cooking areas for My Zone - Dynamic cooking for one item of cookware. Change the default power levels of the cooking areas for single dynamic cooking mode. 27

Section	Page
Freedom® Induction cooktop	1
en-us	2
Table of contents	2
1 IMPORTANT SAFETY INSTRUCTIONS	3
1.1 Safety definitions	3
1.2 General information	3
1.3 Intended use	3
1.4 Restriction on user group	3
1.5 Safe use	3
1.6 Child safety	6
1.7 Electromagnetic interference	6
1.8 Proper installation and maintenance	7
1.9 State of California Proposition 65 Warnings	7
2 Preventing material damage	8
2.1 Overview of the most common types of damage	8
3 Environmental protection and energy-saving	8
3.1 Disposal of packaging	8
3.2 Saving energy	8
4 Induction cooking	8
4.1 Advantages of induction cooking	8
4.2 Cookware	9
4.2.1 No cookware/cookware of an unsuitable size	9
4.2.2 Unsuitable cookware	9
4.2.3 Composition of the cookware base	9
4.2.4 Empty cookware or cookware with a thin base	9
4.2.5 Cookware detection	9
5 Familiarizing yourself with your appliance	10
5.1 Cooking surface	10
5.2 Control panel	10
5.2.1 Touch keys and touch fields	10
5.3 Overview of the menus	10
5.3.1 Main screen	10
5.3.2 Function bar	11
5.3.3 Info menu	11
5.3.4 Notifications and alerts	11
5.3.5 Cookware mode menu	11
5.4 Cooking position display	11
5.5 Residual heat indicator	12
6 Operation	12
6.1 First time use	12
6.2 Turning the cooktop on or off	12
6.2.1 Turning the cooktop on	12
6.2.2 Turning the cooktop off	12
6.3 Cooking zone settings	12
6.3.1 Setting a cooking zone	12
6.3.2 Changing the power level	12
6.3.3 Turning the cooking zone off	12
6.4 Recommended cooking settings	13
6.4.1 Cooking charts	13
6.5 Kitchen timer	14
6.5.1 Setting the Kitchen timer	14
6.5.1.1 Using the timer plus function	15
6.5.2 Pausing the Kitchen timer	15
6.5.3 Changing or canceling the Kitchen timer	15
6.6 Stopwatch	15
6.6.1 Starting the Stopwatch	15
6.6.2 Pausing the Stopwatch	16
6.6.3 Canceling the Stopwatch	16
6.7 PowerBoost®	16
6.7.1 Restrictions for using the PowerBoost® function	16
6.7.2 Activating PowerBoost®	16
6.7.3 Deactivating PowerBoost®	16
6.8 PanBoost™	16
6.8.1 Restrictions for using PanBoost™	16
6.8.2 Activating PanBoost™	17
6.8.3 Deactivating PanBoost™	17
6.9 Keep warm	17
6.9.1 Activating the keep warm function	17
6.9.2 Deactivating the keep warm function	17
6.10 Transfer function	17
6.10.1 Using the transfer function	17
6.11 Cooking sensor mode	18
6.11.1 Suitable cookware for the cooking sensor function	18
6.11.2 Types of cooking processes with the cooking sensor function	18
6.11.2.1 Tips for cooking with the cooking sensor mode	19
6.11.3 Setting the boiling point	19
6.11.4 Setting the cooking sensor function	19
6.11.5 Changing the temperature for the cooking sensor function	20
6.11.6 Turning the cooking sensor function off	20
6.11.7 Cooking charts for the cooking sensor function	20
6.12 Wireless cooking sensor	23
6.12.1 Preparing and maintaining the wireless cooking sensor	23
6.12.1.1 Attaching the silicone patch	23
6.12.1.2 Attaching the wireless cooking sensor	23
6.12.1.3 Connecting the wireless cooking sensor to the control panel	24
6.12.1.4 Resetting the wireless cooking sensor	24
6.12.2 Cleaning	24
6.12.2.1 Cooking sensor	24
6.12.2.2 Silicone patch	24
6.12.2.3 Cooking sensor window	24
6.12.3 Replacing the battery	24
6.12.4 Declaration of Conformity	25
6.13 MyZone®	25
6.13.1 Activating MyZone®	25
6.13.2 Changing the power level during dynamic cooking	26
6.13.3 Deactivating MyZone®	26
6.14 TeppanyakiPro™ mode	26
6.14.1 Suitable cookware for TeppanyakiPro™ mode	26
6.14.2 Activating TeppanyakiPro™ mode	26
6.14.3 Changing the power level during Teppanyaki mode	27
6.14.4 Deactivating Teppanyaki mode	27
6.15 Panel lock	27
6.15.1 Activating the panel lock	27
6.15.2 Deactivating the panel lock	27
6.16 Pause function	27
6.16.1 Activating the pause function	27
6.16.2 Deactivating the pause function	27
6.17 Basic settings	27
6.17.1 Basic settings overview	27
6.17.2 Changing the basic settings	28
7 Home Connect™	28
7.1 Setting up Home Connect™	29
7.2 Overview of the Home Connect™ settings	29
7.3 Wi-Fi symbols	29
7.4 Changing settings via the Home Connect™ app	29
7.5 Software update	30
7.6 Remote diagnostics	30
7.7 Data Protection	30
7.8 Wi-Fi module	30
7.8.1 FCC COMPLIANCE STATEMENT	30
7.8.2 INDUSTRY CANADA STATEMENT	30
8 Cooktop - Hood Sync	30
8.1 Connecting appliances directly	30
8.2 Connecting appliances via your home network (Wi-Fi)	31
8.3 Resetting the connection	31
8.4 Controlling the hood via the cooktop	31
8.4.1 Setting the fan	31
8.4.2 Turning off the fan	31
8.4.3 Setting automatic mode	31
8.4.4 Deactivating automatic mode	31
8.4.5 Setting the hood lighting	31
8.5 Overview of the hood control settings	31
9 Cleaning and maintenance	32
9.1 Cleaning agents	32
9.2 Cleaning the glass ceramic cooktop	32
9.3 Cleaning the cooktop frame	32
9.4 Cleaning recommendations	32
9.5 Maintenance	33
10 Troubleshooting	34
11 Disposal	35
11.1 Disposal of your old appliance	35
12 FAQs	36
12.1 Using the appliance	36
12.2 Noises	36
12.3 Cookware	36
12.4 Cleaning	37
12.5 Home network	37
13 Customer service	37
13.1 Model number (E-Nr.) and production number (FD)	38
13.2 Rating plate location	38
14 STATEMENT OF LIMITED PRODUCT WARRANTY	38
14.1 What this warranty covers & Who it applies to	38
14.2 How long the warranty lasts	38
14.3 Repair/replace as your exclusive remedy	38
14.4 Out of warranty product	39
14.5 Warranty exclusions	39

Match case Limit results 1 per page

Operation

en-us

The display shows the power level for the entire cooking

zone.

If you have selected a setting with only one warm area,

the residual heat indicator is displayed in for the area

with no power level.

Changing the power level during Teppanyaki mode

You can change the preset power levels while you are

cooking.

▶

Touch the area you want to change and set a different

power level in the display.

Note:

If you change the orientation of the Teppanyaki grid-

dle, select the appropriate setting for the new position on

the cooking zone display.

Deactivating Teppanyaki mode

Touch the power level in the cooking zone display.

Touch

and select a different cookware mode.

Touch

to confirm.

6.15

Panel lock

You can use the panel lock to prevent the cooktop from

being turned on accidentally.

Activating the panel lock

Requirement:

The cooktop is turned on.

▶

Touch an hold

for approximately 4 seconds.

lights up.

A signal sounds.

The control panel is locked.

Deactivating the panel lock

Requirement:

The cooktop is turned on.

▶

Touch an hold

for approximately 4 seconds.

lights up.

A signal sounds.

The control panel is unlocked.

6.16

Pause function

With the Pause function, you can interrupt a cooking

process, for example to clean the control panel without

changing any settings.

When you activate the pause function:

All currently active settings light up on the display.

The appliance pauses heating.

If the Kitchen timer or Stopwatch is set, it will continue

running, but you cannot change the timer settings.

The pause function has no effect on the main switch.

You can turn off the cooktop at any time.

Activating the pause function

▶

Touch

The cooktop is locked for 30 minutes.

is displayed in the function bar, only if a cooking

process has been started.

Deactivating the pause function

Touch

The cooking process is resumed.

Notes

If you do not continue cooking within 30 minutes, the

cooktop turns off automatically.

If you move cookware across the cooking surface while

the pause function is active, the settings may be lost.

6.17

Basic settings

You can configure your appliance to meet your needs.

Basic settings overview

Here you can find an overview of the basic settings and the preset factory settings.

Display

Setting

Options

Brightness

Change the brightness of the touchscreen display.

Start screen

Choose whether or not the brand logo will be displayed when you turn on

the cooktop.

Sounds

Select which signal tones you want the appliance to use.

SapphireGlow™

Change the default power levels of the cooking areas for My Zone - Dy-

namic cooking for one item of cookware.

MyZone - power levels

Change the default power levels of the cooking areas for single dynamic

cooking mode.