Toshiba 65UL610U User Manual - Page 36

To remove the battery, Specifications, cover and cut the two

Page 36 highlights

Chapter 6: Basic features To remove the battery: Drain the battery before disassembling. Note: This is an explanation for disposal of the 3D glasses, not for modification. Once disassembled, the battery cannot be recovered. 1 Fold the frame with no power switch, and use a Phillips-head screwdriver to remove the two screws on the inside of the hinge. 2 Fold the frame inward to remove it from the side cover. •If it is hard to remove, insert a flat-head screwdriver or the like to force it open. 3 Remove the battery from the inside of the side cover and cut the two cords one by one with scissors. • Insulate the cords of the removed battery with vinyl tape or the like. screw side cover battery Warning • Do not nail, hammer, or step on the battery. Doing so may cause a short circuit, leading to overheating, cracking, or fire. • Do not overheat, disassemble, or short-circuit the battery, or throw it into fire. Doing so may cause cracking or fire. • Do not connect the battery cord with metal items such as wires. Also, do not carry or store the battery with metal items such as necklaces or hairpins. Doing so may cause a short circuit, leading to overheating, cracking, or fire. Note: • To avoid injury, use caution when removing the battery. • Follow local regulations for disposal of this product. This symbol is only applicable in European Union countries. Specifications: 3D method Dimensions Operating temperature Mass (weight) Material Battery Battery life Liquid Crystal Shutter Width: 6-13/16 inches (173 mm) Height: 1-21/32 inches (42 mm) Depth: 6-13/16 inches (173 mm) 32°F - 104°F (0°C - 40°C) 0.08 lbs (35 g) or less Frame: Resin Lens: Liquid crystal glass Lithium-ion polymer rechargeable battery AHB341018PI 23 hours * The battery operating time may become shorter depending on the usage condition or environment. Note: • If the usage time is extremely short even after the battery has been charged fully, the battery may be worn out. Consult the shop where you purchased the product. • The specification may change without notice. This symbol is only applicable in China. 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106

36
Chapter 6: Basic features
To remove the battery:
Drain the battery before disassembling.
Note:
This is an explanation for disposal of the 3D glasses,
not for modification. Once disassembled, the battery
cannot be recovered.
1
Fold the frame with no
power switch, and use a
Phillips-head
screwdriver to remove
the two screws on the
inside of the hinge.
2
Fold the frame inward to
remove it from the side
cover.
If it is hard to remove,
insert a flat-head
screwdriver or the like
to force it open.
3
Remove the battery from
the inside of the side
cover and cut the two
cords one by one with
scissors.
Insulate the cords of the
removed battery with
vinyl tape or the like.
Warnin
g
• Do not nail, hammer, or step on the battery.
Doing so may cause a short circuit, leading to
overheating, cracking, or fire.
• Do not overheat,
d
isassemble, or short-circuit the
battery, or throw it into fire.
Doing so may cause cracking or fire.
• Do not connect the battery cor
d
with metal items
such as wires. Also,
d
o not carry or store the
battery with metal items such as necklaces or
hairpins.
Doing so may cause a short circuit, leading to
overheating, cracking, or fire.
Note:
To avoid injury, use caution when removing the battery.
Follow local regulations for disposal of this product.
Specifications:
Note:
If the usage time is extremely short even after the battery
has been charged fully, the battery may be worn out.
Consult the shop where you purchased the product.
The specification may change without notice.
screw
side cover
battery
This symbol is only applicable in European
Union countries.
This symbol is only applicable in China.
3D method
Liquid Crystal Shutter
Dimensions
Width: 6-13/16 inches (173 mm)
Height: 1-21/32 inches (42 mm)
Depth: 6-13/16 inches (173 mm)
Operating
temperature
32°F - 104°F (0°C - 40°C)
Mass (weight)
0.08 lbs (35 g) or less
Material
Frame: Resin
Lens: Liquid crystal glass
Battery
Lithium-ion polymer rechargeable
battery AHB341018PI
Battery life
23 hours
* The battery operating time may
become shorter depending on the usage
condition or environment.