Home » Toshiba Manuals » Flat Panel Televisions » Toshiba 65UL610U » Manual Viewer

Toshiba 65UL610U User Manual - Page 37

Using 3D functions, The 3D button's operation

Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Chapter 6: Basic features Using 3D functions Incoming video signals can either be in 2D or 3D format. A 2D signal can be viewed in either 2D or 3D, and 3D can be viewed in either 2D or 3D. If the TV can detect the fact that a signal is 3D, it can change to 3D mode automatically - see "3D Auto Start" (-p. 39). Otherwise you can change the viewing mode using the 3D button. Finally, the format of the 3D signal can be either Side by Side (SBS) or Top and Bottom (TAB). You may have to choose the correct format if the TV can not detect it automatically - see "selecting 3D format", below. Moreover, you can change 2D images to 3D images by pressing the 3D button when viewing in 2D. Note: • When 3D format signal is not received, display mode is not switched to 3D. • If appropriate mode and format are not selected, 3D image is not correctly displayed. • There will be restrictions on the Picture Size settings for 3D mode and 2D mode. • There are individual differences in perception of 3D images. • When viewing 3D images, wear the 3D glasses. • The 2D to 3D conversion function is activated and controlled by you according to your personal preferences. • The 2D to 3D conversion function is meant for enjoyment of 2D home video, and other 2D content you create, in 3D according to your personal preferences. • The 2D to 3D conversion function is not intended for use with pre-recorded 2D copyrighted content owned by a third-party unless the copyright owner has given direct or indirect permission, or unless applicable law permits such use. Switching display mode or selecting 3D format There are four modes for watching TV. Mode Description 3D Displays 3D images. 2D Displays 2D images by changing 3D images to 2D. 2D to 3D Displays 3D images by changing 2D images to 3D. Native Displays a received signal format as it is. 3D signals can be sent in one of three formats. 3D format Description Side by Side Images for the left and right eyes (SBS) are positioned side-by-side. Top and Bottom (TAB) Images for the left and right eyes are positioned at the top and bottom of the screen. Frame Packing (FP) * Two frames of images (one for the left eye, one for the right eye) are positioned at the top and bottom of the screen. * This format cannot be selected manually. If the right and left images are the same in Native mode, select SBS. If the top and bottom images are the same in Native mode, select TAB. The 3D button's operation: The behavior of when viewing in Native mode is different depending on the input mode. Input Behavior Analog Inputs Changes the viewing mode to 2D to 3D mode. HDMI Displays the selection window. Analog Broadcast Changes the viewing mode to 2D to 3D mode. Digital Broadcast Displays the selection window. Media Player (Photo, Movie) Displays the selection window. Wallpaper Changes the viewing mode to 2D to 3D mode. Internet Displays the selection window. Note: When viewing 3D mode or 2D to 3D mode, pressing changes the viewing mode to Native mode. 37

Section	Page
Important Safety Instructions	3
Installation, Care, and Service	3
Choosing a location for your LCD TV	5
Safety Precautions for 3D glasses	6
Contents	10
Chapter 1: Introduction	12
Features	12
Overview of installation, setup, and use	12
Front panel control	13
Back panel connections	13
Bundling the cables	14
Chapter 2: Connecting your TV	15
Overview of cable types	15
About the illustrations	15
Connecting to a Satellite dish, an Antenna, or Cable TV	16
Connecting an HDMI® or DVI device to the HDMI input	17
Connecting a VCR or DVD player with ColorStream® (component video)	18
Connecting remote IR devices	19
Connecting a digital audio system	20
Using the TV remote and HDMI® CEC Control to control other devices	21
Connecting an HDMI audio system	21
Connecting a PC	22
Connecting to a home network	23
Chapter 3: Using the remote control	24
Controlling other devices	24
Installing batteries	24
Learning about the Remote Control	25
Chapter 4: Initial Setup and Menu	26
Initial Setup	26
Navigating the menu system	27
Main menu layout	28
Quick menu	29
Chapter 5: Setting up your TV	30
Changing Initial settings	30
Menu language	30
Local Time Setting	30
Location	30
ANT/CABLE IN	30
Storing channels in memory (optional)	30
Auto Tuning	30
Manual Tuning	31
Skipping channels	31
Skipping video inputs	31
Labeling channels	32
Labeling video inputs	32
Configuring shared inputs	32
Setting the Auto Input feature	33
Chapter 6: Basic features	34
Viewing 3D images	34
Using the 3D glasses	35
Using 3D functions	37
Tuning channels	41
Setting the Channel Tuning Mode	41
Tuning in to the next programmed channel	41
Tuning in to a specific channel (programmed or unprogrammed)	41
Using the Channel Browser™	41
Using Channel Return	43
Using SurfLock™	43
Selecting the video input to view	43
Using closed captions	44
Analog CC mode	44
Digital CC settings	44
Setting the PIN code	45
Entering a new PIN code	45
Changing or deleting your PIN code	45
Forgotten PIN code	45
Using parental controls	45
Blocking TV programs and movies by rating (V-Chip)	45
Downloading an additional rating system	46
Displaying ratings	47
Unlocking programs	47
Locking specific channels	47
Locking video input	47
Setting a time limit for games	48
Locking the control panel	48
Using HDMI® CEC Control	48
Controlling HDMI® CEC playback devices	49
HDMI® CEC Control input source selection	49
Adjusting the amplifier’s audio	50
Other HDMI® CEC Control functions	50
Using the HDMI® settings feature	50
Viewing the HDMI® signal information	50
Using your PC with the TV	51
Adjusting the image	51
Setting the PC audio	51
Setting the timer to turn on the TV	51
Setting the sleep timer	52
Adjusting the POWER LED’s brightness	52
Setting Automatic Power Down	52
Setting No Signal Power Down	52
Displaying TV status information	53
Viewing support information	53
Resetting to Factory Defaults	53
Power failure	53
Chapter 7: Picture and sound controls	54
Selecting the picture size	54
Scrolling the picture	56
Using the Auto Aspect feature	56
Using the 4:3 Stretch	56
Freezing the picture	56
Adjusting the picture	57
Selecting the picture mode	57
Adjusting the picture quality	57
Using the advanced picture settings features	58
Edge Enhancer	58
Dynamic Contrast	58
DynaLight™	58
Static Gamma	58
Film Stabilization	58
ClearScan 480™	59
MPEG NR	59
DNR	59
Auto Brightness Sensor	59
Backlight Adjustment Pro	59
ColorMaster™	60
Base Color Adjustment	60
Color temperature	60
Resetting to the factory default	60
Setting the Expert Picture Settings	60
Test Pattern	60
RGB Filter	60
White Balance	60
Resetting to the factory default	61
Locking the picture settings	61
Adjusting the audio	61
Muting the sound	61
Selecting stereo/SAP broadcasts	61
Adjusting the audio balance	62
Adjusting the range	62
Selecting the optical audio output format	62
Using the Dolby® Digital Dynamic Range Control feature	62
Using Audyssey Dynamic Volume®	62
Using advanced sound features	63
Using surround sound	63
Chapter 8: Advanced features	64
Using your home network	64
Setting up the Network	65
Wireless Setup	65
Advanced Network Setup	67
Network Connection Test	68
Using the software keyboard	68
Performing a Software Upgrade	69
Viewing the Software Licenses	69
Using the NET TV™ feature	69
NET TV menu	69
Netflix	70
VUDU™	70
YouTube™	70
CinemaNow	71
Blockbuster	71
Pandora	71
Yahoo!® TV Widgets	71
Using the Media Player	73
Media Player Specifications	73
Basic operation	73
Viewing Movie files	74
Playing Music files	75
Viewing Photo files	76
Using the Wallpaper feature	78
Chapter 9: Troubleshooting	79
General troubleshooting	79
LED indications	81
Chapter 10: Appendix	82
Specifications	82
Acceptable signal formats for PC IN, HDMI, and 3D	84
PC IN signal formats	84
HDMI signal formats	85
3D signal formats	86
Remote control functional key chart	87
Operating other devices	89
Programming the remote to operate other devices	89
Device code setup	89
Searching for a device code	90
Locking the volume keys	90
Clearing the remote’s programming	90
Resetting to the factory default	90
Operating the TV with combination buttons	91
Remote control codes	92
Limited United States Warranty for LCD Televisions	98
Limited United States Warranty Product - Exchange Warranty	99
Limited Canadian Warranty for Toshiba Brand Flat Panel Televisions	100
Limited Canadian Warranty for Toshiba Brand 3D Glasses	102

Match case Limit results 1 per page

Chapter 6: Basic features

Using 3D functions

Incoming video signals can either be in 2D or 3D

format. A 2D signal can be viewed in either 2D or 3D,

and 3D can be viewed in either 2D or 3D.

If the TV can detect the fact that a signal is 3D, it can

change to 3D mode automatically – see “3D Auto Start”

(

p. 39). Otherwise you can change the viewing mode

using the 3D button. Finally, the format of the 3D signal

can be either Side by Side (SBS) or Top and Bottom

(TAB). You may have to choose the correct format if the

TV can not detect it automatically – see “selecting 3D

format”, below.

Moreover, you can change 2D images to 3D images by

pressing the 3D button when viewing in 2D.

Note:

•

When 3D format signal is not received, display mode is

not switched to 3D.

•

If appropriate mode and format are not selected, 3D

image is not correctly displayed.

•

There will be restrictions on the Picture Size settings for

3D mode and 2D mode.

•

There are individual differences in perception of 3D

images.

•

When viewing 3D images, wear the 3D glasses.

•

The 2D to 3D conversion function is activated and

controlled by you according to your personal

preferences.

•

The 2D to 3D conversion function is meant for enjoyment

of 2D home video, and other 2D content you create, in

3D according to your personal preferences.

•

The 2D to 3D conversion function is not intended for use

with pre-recorded 2D copyrighted content owned by a

third-party unless the copyright owner has given direct

or indirect permission, or unless applicable law permits

such use.

Switching display mode or selecting 3D format

There are four modes for watching TV.

3D signals can be sent in one of three formats.

* This format cannot be selected manually.

If the right and left images are the same in Native mode,

select

SBS

If the top and bottom images are the same in Native

mode, select

TAB

The 3D button’s operation:

The behavior of

when viewing in Native mode is

different depending on the input mode.

Note:

When viewing 3D mode or 2D to 3D mode, pressing

changes the viewing mode to Native mode.

Mode

Desc

iption

Displays 3D images.

Displays 2D images by changing 3D

images to 2D.

2D to 3D

Displays 3D images by changing 2D

images to 3D.

Native

Displays a received signal format as it is.

3D fo

mat

Desc

iption

Side by Side

(SBS)

Images for the left and right eyes

are positioned side-by-side.

Top and

Bottom

(TAB)

Images for the left and right eyes

are positioned at the top and

bottom of the screen.

Frame

Packing

(FP) *

Two frames of images (one for

the left eye, one for the right eye)

are positioned at the top and

bottom of the screen.

Input

Behavio

Analog Inputs

Changes the viewing mode to 2D

to 3D mode.

HDMI

Displays the selection window.

Analog Broadcast

Changes the viewing mode to 2D

to 3D mode.

Digital Broadcast

Displays the selection window.

Media Player

(Photo, Movie)

Displays the selection window.

Wallpaper

Changes the viewing mode to 2D

to 3D mode.

Internet

Displays the selection window.