Toshiba 65UL610U User Manual - Page 59

Chapter 7: Picture and sound controls ClearScan 480™ This feature provides smoother motion and a crisper image. 1 > Settings > PICTURE > Advanced Picture Settings > . OK 2 Press B or b to select ClearScan 480. 3 Press C or c to select On. Press . Note: If the Picture Mode is set to Game or the TV is 3D mode, this feature is not available. MPEG NR The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression. 1 > Settings > PICTURE > Advanced Picture Settings > . OK 2 Press B or b to select Noise Reduction. Press . OK 3 Press B or b to highlight MPEG NR. 4 Press C or c to select either Low, Middle, High, or Off. Press . Note: If the Picture Mode is set to Game or PC, this feature is not available. DNR DNR lets you soften the screen representation of a weak signal to reduce the noise effect. 1 > Settings > PICTURE > Advanced Picture Settings > . OK 2 Press B or b to select Noise Reduction. Press . OK 3 Press B or b to select DNR. 4 Press C or c to select Low, Middle, High, Auto, or Off. Press . Note: • If the Picture Mode is set to Game or PC, this feature is not available. • The differences may not always be noticeable. For the best results, use lower settings, as picture quality may be greatly reduced if the setting is too high. Auto Brightness Sensor When the Auto Brightness function of Auto Brightness Sensor is set to On, the TV optimizes the backlighting levels to suit ambient light conditions. 1 > Settings > PICTURE > Advanced Picture Settings > . OK 2 Press B or b to select Auto Brightness Sensor Settings. Press . OK 3 Press B or b to select Auto Brightness Sensor. 4 Press C or c to select On or Off. Press . Note: When the Picture Mode is set to AutoView, this feature is automatically set to On and will not be available. Backlight Adjustment Pro This feature adjusts the backlight so that it can change to match the ambient light conditions. 1 > Settings > PICTURE > Advanced Picture Settings > . OK 2 Press B or b to select Auto Brightness Sensor Settings. Press . OK 3 Press B or b to select Backlight Adjustment Pro. Press OK . The Backlight Control Level screen appears. 4 Press OK to display the adjustment window. Press C or c to select the point. Press B or b to adjust the level. The adjustment range is from 0 to 100. Backlight Adjustment Pro Backlight Control Level 37 100 Control Level 0 Ambient Light Cancel Reset 5 Press OK to fix the adjustment. To cancel the adjustment when selecting a point, select Cancel on the screen. To reset the adjustments of all points to the factory defaults, select Reset on the screen. Press . OK Note: If the Auto Brightness Sensor is set to Off, this feature will not be available. 59