Toshiba A205-S4777 Maintenance Manual - Page 153
FL Inverter Board
UPC - 032017913844
View all Toshiba A205-S4777 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
4 Replacement Procedures 4.12 FL Inverter Board Removing the FL Inverter Board To remove the FL inverter board, first remove the battery pack, display assembly, and display mask; then follow the steps below. 1. Remove the M2x3 black screw securing the FL inverter board to the LCD display assembly. Figure 4-38 Removing the screw NOTE: If a dual inverter board is installed, you must remove two additional M2.5x4 screws. 2. Disconnect the two connectors on either side of the board. Figure 4-39 Removing the connectors Minnesota 10M/10MG Series Maintenance Manual 4-35
4
Replacement Procedures
4.12 FL Inverter Board
Removing the FL Inverter Board
To remove the FL inverter board, first remove the battery pack, display assembly, and display
mask; then follow the steps below.
1.
Remove the M2x3 black screw securing the FL inverter board to the LCD display
assembly.
Figure 4-38
Removing the screw
NOTE
: If a dual inverter board is installed, you must remove two additional M2.5x4
screws.
2.
Disconnect the two connectors on either side of the board.
Figure 4-39
Removing the connectors
Minnesota 10M/10MG Series Maintenance Manual
4-35